Dakota Alert Wireless Motion Alert 3000 - Specifications

Wireless Driveway Sensor:

• Frequency: 433.92 MHz
• Operating range: -30F to 110F
• Battery life: 6-12 months
• Reset time: 15 seconds
• Power Source: 9V (9V Battery Not Included)
• Operating Temperature Range: -30ðF to 110ðF
• Wireless Range: 600 feet*

Driveway Chime Receiver:

• Frequency: 433.92 MHz
• Operating voltage: 12VDC
• 12 volt DC output current: 400 mA maximum
• Relay output rating: 24VDC at 3 Amp

Dakota Alert Wireless Motion Alert 3000 - Included

• 1 - Dakota Alert WMT-3000 Wireless Driveway Sensor
• 1 - Dakota Alert WR-3000 Driveway Alarm Chime
• 1 - 12V Power Supply for Receiver

Dakota Alert Wireless Motion Alert 3000 - Description

The Dakota Alert WMA-3000 is the next step in the evolution of the driveway alarm system. This system is the ultimate in PIR wireless systems, with an incredible wireless transmission range of 600'*. The transmitter, which operates on one 9 volt battery, can easily be mounted on a tree or post near the drive. When it detects people or vehicles, it will send a wireless signal back to the receiver, which will then emit a pleasant chime sound. No more missed visitors or customers! Since it is wireless, installation and operation are quick and easy.

Driveway Sensor and Transmitter:

The driveway sensor uses a passive infrared (PIR) beam to detect people or vehicles out to about 80 feet (adjustable) then send a radio signal back to the WR-3000 receiver up to 600 feet away*. The transmitter is weatherproof and meant for exterior locations. Up to 4 zones can be monitored with additional transmitters. The transmitters can be programmed so they will each sound a different tone at the receiver.

Receiver:

The Dakota Alert WR-3000 is the driveway chime for this system. It includes an on/off switch, volume control, and four different chime sounds to choose from. The receiver is also equipped with 4 form C relays (one for each zone) and one 12 VDC output terminal that will activate for several seconds when a signal is received. The receiver can be user programmed so the12VDC terminal and one relay will activate for 1 to 10 minutes if this is desired. The tones will still sound for several seconds.

The Dakota WMA3000 can be used in conjunction with the other Dakota Alert Transmitters -WPT3000 Probe, WRT3000 Rubber Hose, WUT3000 Universal Transmitter, WIR3000 Indoor PIR Transmitter. This gives you unlimited possibilities for monitoring your property!

*dependant on terrain conditions

Dakota Alert Wireless Motion Alert 3000 - Downloads

• Driveway Alarm Accessories List