| | |
| Shop by Brand
| |
| | |
|
|
Optex AXTFR Wireless Sensors
|
|
Canadian Price:
From $617.00 to $667.00 CAD
Manufacturer: Optex
Manufacturer Part No: AX100TFR
Product Options
| |
|
Untitled Document
|
|
Optex Wireless Photo Beam Sensors AX-TFR Series - Specifications
| Model |
AX-100TFR |
AX-200TFR |
| Range |
30m (100ft.) |
60m (200ft.) |
| Maximum Arrival Distance |
265m (870ft.) |
530m (1,740ft.) |
| Detection Method |
Infrared beam interruption detection |
| Beam Frequency Selection |
4 channel |
| Interruption Period |
Variable between 50, 100, 250, 500msec
(4 steps) |
| Power Source |
3.6V 13.0Ah : LSH20 lithium batteries
manufactured by SAFT
Transmitter : 2 units Receiver : 2 units |
| Current Draw |
620μA
T:300μA + R:320μA
(at 25°C,3.6VDC) |
810μA
T:490μA + R:320μA
(at 25°C,3.6VDC) |
| * Battery Life |
Approximately
5 years |
Approximately
3 years |
| Output |
Alarm Output |
Form C-Solid State Switch : 3.6VDC, 0.01A |
| Alarm Period |
2 sec (± 1) nominal |
| D.Q. Output |
Form A/B-Solid State Switch : 3.6VDC, 0.01A |
| Tamper Output for Front Cover |
Form C : 3.6VDC, 0.01A
opens when cover removed. (Receiver only) |
| Tamper Output for Back Box |
Form C : 3.6VDC, 0.01A
opens when either back box or chassis is
removed from the installment. |
| Low Battery Output |
Form A/B-Solid State Switch: 3.6VDC, 0.01A
(Transmitter & Receiver) |
| Indicator |
Alarm Indicator (Receiver) |
Alarm : ON,
Light receiving : flicker or OFF |
| Power (Transmitter) |
Power ON : ON,
Power OFF : OFF |
| Low Battery |
Voltage Reduction : flicker |
| Operating Temperature |
-20°C – +60°C(-4°F – 140°F) |
| Operating Ambient Humidity |
95%(Max.) |
| Alignment Angle |
± 90° Horizontal, ± 5° Vertical |
| Mounting |
Indoor/Outdoor, Wall/Pole/Tower mounting
(Optional main unit mounting brackets are
required, when the units mount in the tower.) |
| Weight |
1600g (56.5oz)
(Total weight of transmitter + receiver,
excluding accessories) |
| International Protection |
IP55 |
Optex Wireless Photo Beam Sensors AX-TFR Series - Included
- 1 - Wireless Photo Beam Transmitter
- 1 - Wireless Sensor Receiver
Optex Wireless Photo Beam Sensors AX-TFR Series
The new Optex AX-100TFR and AX-200TFR wireless sensors operate on four 3.6V batteries which come with the system. The battery life is typically about 5 years with the 100ft model and 3 years with the 200ft model. Since this system is completely wireless it much easier and less expensive to install. The unit comes wireless ready with a multi functional back box and is compatible with most manufacturers wireless systems.
Optex TFR Wireless Sensor Features:
- Battery-operated detector
- Batteries are not included.
- Use four LSH20 (3.6 V, 13 Ah) batteries manufactured by SAFT.
- Battery life: Approximately five years (AX-100TFR)
- Approximately three years (AX-200TFR)
- Back box for wireless transmitters
- Back box can conceal two wireless transmitters and batteries.
- N.C./N.O. selection switch
- Both N.C. and N.O. input wireless transmitters can be used.
- Battery saving function for wireless transmitter
- Turning ON the battery saving timer switch reduces the battery
consumption of the wireless transmitter.
- Intermittent output function
Turning ON the intermittent output function forces intermittent
output while the problem status exists.
- 4 channel beam frequency selector
- Cross talk is eliminated with 4, channel selectable, beam
frequencies. Used when stacking beams or for long range
applications.
- International protection
IP55
- LED indicator for an easy alignment
It flickers on/off to help with easy alignment located on the
receiver.
- D.Q. circuit (environmental disqualification):
The environmental compensation circuit is designed to eliminate
false alarms caused by snow, fog, heavy rain, ice and
misalignment.
- Tamper: Form C opens when either cover or back box or chassis is removed.
- Beam interruption adjustment function: This function allows you to select the suitable beam interruption
time for any environment.
Optex Wireless Photo Beam Sensors AX-TFR Series - Support and Downloads
|
| | |