| | |
| Shop by Brand
| |
| | |
|
|
Sensaphone Cellular Dialer
|
|
Canadian Price:
$1,109.00 CAD
Item Number: FGD400SX5E
|
|
|
|
Sensaphone Cellular Dialer
Now you can protect your home, cabin or business when you can't be there - the Sensaphone 400 Dialer will monitor your house, cottage, cabin, computer rooms, equipment centers, offices, or any unattended facility to detect power failures, temperature extremes, intrusions, water incursion, sounds such as smoke and burglar alarms, and other conditions of your choice. It includes a relay output, allowing you to turn up the heat before you arrive, or remotely control other devices!
The Telular Fixed Wireless Terminal gives you the ability for wireless communication anywhere. The SX5e Fixed Wireless Terminal provides wireless connectivity for standard telephone, fax, and computer equipment. The Phone cell gives you a full 3 watts of power for reliable signal strength. The SX5e provides voice, GPRS Packet Data, circuit switched data, circuit switched computer fax, and optional analog fax capability. Simple RJ-11C interface.
Using the Sensaphone 400 with the Telular Cellular Terminal allows you to quickly install a robust and versatile monitoring system anywhere with GSM Cellular Coverage!
Sensaphone Cellular Dialer - Specifications
Sensaphone 400 Specifications: |
Alert Zones
|
| Number of Zones: |
4 (2.8K thermistor comes installed on zone 1 for temperature monitoring) |
| Zone Connector: |
Terminal block |
| Zone Types: |
N. O./N. C. contact, 2.8K thermistor (-20° F to 150° F or -30° C to 65° C ) |
| Zone Characteristics: |
5.11K to 2.85V (Short circuit current: 1mA max.) |
| A/D Converter Resolution: |
10 bits ±2 LSB |
| Zone Protection: |
5.5VDC Metal Oxide Varistor with fast acting diode clamps. |
Built in Microphone |
| Internal Electret Condenser: |
For listening in to on-site sounds and detecting high sound levels. |
Phone Interface |
| Line RJ11 Jack: |
For connection to a two-wire analog telephone line. (6’ modular cord included) |
| Extension RJ11 Jack w/ Line Seizure: |
For connecting other devices on the same telephone line, devices connected to this jack are disconnected in the event that the 400 must dial out for an alarm. |
| Phone Line Protection: |
Metal Oxide Varistor & self-resetting fuse |
LED Indicator |
| System On: |
On steady when the unit is in RUN mode. LED blinks once every few seconds while in STANDBY mode. |
| Phone In Use: |
On steady when the telephone line is being used. LED blinks when no dial tone is detected. Off when telephone line is not in use. |
| Alarm: |
Off when no alarm exists. Blinks when an unacknowledged alarm exists. On steady when an acknowledged alarm exists |
| Battery Ok: |
On steady when the battery is in good condition. Blinks when the battery is low. Off when the battery must be replaced. |
Relay Output |
| Rating: |
Rated for 1A 30VAC/1A 30VDC maximum. |
Power Supply |
| Power Supply: |
120VAC/9VDC 60Hz 6W wall plug-in transformer w/6’ cord. |
| Power Consumption: |
1.5 Watts |
| Power Protection: |
Metal Oxide Varistor |
| Battery Backup: |
Six size-C alkaline batteries (not included), providing up to 24 hours of back-up time. |
Environmental |
| Operating Temperature: |
32–122° F (0–50° C) |
| Operating Humidity: |
0–90% RH non-condensing |
| Storage Temperature: |
32°–140° F (0–60° C) |
Cellular Terminal Specifications
- GPRS packet data, multi-slot Class 10 (up to 72 kbps)*
- Circuit switched digital computer fax and data (up to 14.4 kbps)*
- Short Message Service (SMS)*
- Compatible with popular supplementary services including caller ID, call waiting/call hold, call forwarding, call barring, multi-party calling, and more*
- Least cost routing for trunk or extension side connection
- Optional 19” or 23” rack shelf for PBX installation
- DTMF and pulse-dialing
- Supports up to five phones (5 REN)
- Emergency battery backup (requires 4 AA batteries not included, good for 1 hour of air time)
- Standard GSM Mini-SIM (Subscriber Identification Module) 3 volt and 5 volt compatible
- Supports GSM personalization features (GSM 02.22)
*Subject to network availability
Sensaphone Cellular Dialer - Included
- 1 - Sensaphone 400 Alarm Dialer
- 1 - Power Adapter for Sensaphone Alarm Dialer
- 1 - 2.8K Thermistor hooked up to Zone 1 for temperature monitoring
- Manual
- Mounting Hardware
- 1 - 6 foot phone cord
- 1 - Phone Jack Extension for Line Seizure Feature
- 1 - Telular SX5e Cellular Terminal
- 1 - Power Supply
Not Included - But Required
- 1 - Activated GSM SIM Card
Sensaphone Cellular Dialer - Support and Downloads
|
| | |