Temperature Guard VM500-3HT - Specifications

Monitor for Temperature, Humidity and Power

• Temperature Sensing Range: 32ºF to 125ºF
• Temperature Accuracy: ±2ºF
• Power Requirements: 120VAC at 50/60 Hz wall mount transformer (included)
• International power supplies available
• Material: Flame retardant ABS plastic, 94-5VA
• Dimensions: Enclosure: 5.00" x 5.250" x 1.630"
• Ambient Operating Conditions: 32ºF to 125ºF
• Shipping Weight: 1 lbs
• Agency Compliance: Temperature Guard FCC Approved and Registered

User Programmable Features

• Maximum number of programmable callout telephone numbers: 4
• Maximum number of digits per callout numbers: 20
• Maximum number of digits for programmable Local ID number displayed when calling a pager: 20
• Length of recordable Local Identification message: 10 seconds
• Range of incoming rings before the Temperature Guard answers: 1 to 20
• Number of digits in programmable PIN: 4
• Range of programmable temperature limits: 35ºF to 125ºF

Temperature Guard VM500-3HT - Included

Monitor for Temperature, Humidity and Power

• 1 - Temperature Guard VM500-3
• Built in Rechargeable Battery
• Built in Temperature Sensor (internal)
• Power Supply

Temperature Guard VM500-3HT

Monitor for Temperature, Humidity and Power

The Temperature-Guard VM500-3 power and temperature sensor is a remote temperature monitor and alarm dialer system packed with many great features. The Temperature-Guard VM5003HT will monitor the temperature, humidity and power wherever it is located. When the Temperature-Guard has a temperature, humidity or power alarm, it will dial up to four emergency phone numbers and the integrated voice message will tell you the temperature, humidity and whether the power is on or off. You can also call the Temperature-Guard at any time to find out what the temperature or humidity levels are. Temperature annunciation can be in Fahrenheit or Celsius.

Why own a Temperature Guard? Protect your valuable equipment and assets against damage due to extreme temperature. Reduce down time due to equipment failure or power loss. Receive a telephone call and be notified of possible equipment failure or power loss before damage occurs. Program the low temperature limit to protect against heating system failure and help prevent frozen pipes. Program the high temperature limit to protect against air conditioning failure or against the heating system failing to turn off (this has happened). The Temperature Guard is programmed over the telephone following voice menus. Records maximum and minimum temperature values. Record a 10 second personal identification message over the phone. Works with most telephone pagers.

Temperature Guard Features:

• Monitor temperature, humidity and power. Call and hear status any time.
• The Temperature Guard makes temperature alarm telephone calls if the temperature goes above the upper limit or below the low limit.
• The Temperature Guard makes power alarm telephone calls if there is a power loss.
• The Temperature Guard makes humidity alarm telephone calls if the humidity goes above the upper limit or below the low limit.
• Simple to install...plug in a telephone line, plug in the power and turn it on!
• The Temperature Guard is programmed over the telephone following voice menus
• Programmable low and high temperature alarm limits.
• Record a 10 second personal identification message over the phone.
• Works with most telephone pagers.
• Operates with an answering machine on the same phone line.
• Requires analog phone line.

Temperature Guard VM500-3HT - Support and Downloads

Monitor for Temperature, Humidity and Power

• Temperature Guard Manual
• Temperature Guard Specifications Sheet