Free Shipping Over $299
This transmitter can be triggered by either by a signal sent to activate chimes or by pressing a button to manually trigger the chimes. It can be used as an add-on to the DA-500 or DA-600 Drive-Alert models in case a user decided later that they would like a remote plug-in and/or battery-powered chimes that sound nicer instead of the standard piezo whistle that comes with the two models.
The DA066MP also gives the panel the ability to have alerts sound in multiple rooms or can be used for portable alerts. It’s backwards compatible with any older wireless chime Mier Products. It mounts on top of the Control Panel.
Installation is simple, connect the RED wire to the “+24VDC” terminal, then the BLACK wire to “NEG” or “GND” then a “JUMPER” from that same “NEG” to the “C” terminal and finally the WHITE wire to the “NO” terminal. Please note: on the DA-500 Control Panel the Whistle Switch must be in OFF position. If it is ON, the 1 amp fuse within the control panel will be blown.
* The DA066MP replaces the older model DA066
Back to top