WiFi Water Sensor for Remote Monitoring
The SpotProtect FLOODSPOT is a WiFi Water Sensor for monitoring for water leaks or floods (can also be used to monitor for the absence of water) in any location with existing WiFi and Internet Service. The FLOODSPOT communicates its status back to the SpotProtect Cloud where users can login and view the history of the sensors as well make changes to the sensors programming. The appropriates person(s) can be notified by text and/or email when the sensor goes into an alarm state.
Perfect for applications where a phone line is either unavailable or impractical!
- 802.11 b/g (2.412 - 2.484 GHz)
- Up to 250 ft.* (Typical to standard Wi-Fi devices)
- Open, WEP, WPA, WPA2 Security Standards
- Can be used for NO or NC applications
* Actual range may vary depending on environment.
** Battery life is affected by reporting frequency (heartbeat),
sensor type, Wi-Fi security type, distance from Wi-Fi
router and other variables.
Note: One (1) SPOTCABLE is required to setup the SpotSensors.
As with any monitoring device you must ensure it is installed correctly and tested regularly to ensure it is in working order and reporting as expected. The WIFI device must be located in a dry room temperature location. Do not install it outdoors or in a damp or humid environment. If needed, extend the sensor wire so the WiFI portion can be installed in a suitable location.
For set up instructions visit https://www.spotprotect.com
- 1 - FLOODSPOT WiFi Water Leak Sensor
- 2 - AA Batteries
Radio Specifications Operating Frequency 802.11 b/g (2.412 - 2.484 GHz) Electronics Core Specifications Power Supply: 2 x AA Batteries (Included) Max Operating Temperature Using Alkaline Batteries: -18ÃÂ°C to +55ÃÂ°C (0ÃÂ°F to +130ÃÂ°F) Using Lithium Batteries: -40ÃÂ°C to +85ÃÂ°C (-40ÃÂ°F to +185ÃÂ°F) Device Range Up to 250 ft.* (Typical to standard Wi-Fi devices) Battery Life Up to 5 years depending on sensor type, Wi-Fi security, distance from Wi-Fi router, reporting frequency and other variables. (Testing surpassed 90,000 transmissions until battery depletion.) Wi-Fi Security Standards Open, WEP, WPA, WPA2 Security Standards Wi-Fi Security Programming Via PC software using USB SpotCable and SpotProtect online software. Network Settings Auto DHCP/DNS or Static Data Logging On Wi-Fi disruption, unit will log the most recent 50 readings and transmit when Wi-Fi connection is re-established. Power Consumption 4uA sleep, 35mA active RX, 180mA TX (at +12dBm) Wi-Fi Data Rate Auto configures to best rate for maximum range. LED Lights Status / Activity External Wire Length 3 Feet (36 Inches) Data Logging (With Premiere Subscription to SpotProtect Cloud) On Wi-Fi disruption, unit can log up to 50,000 readings and transmit when Wi-Fi connection is re-established.
Be the first to
Leave a Review