Seco-Larm Two Channel RF Wireless Receiver, 315MHz Form C, 10A@14VDC

Seco-Larm SK-910RD2 radio frequency receiver can remotely control home automation, lights, garage doors, alarm panels, etc. from up to 500ft, or up to 1000' with optional antenna extension (sold separately). The RF receiver has two separately programmable outputs, compatible with all 315MHz Seco-Larm transmitters. Features easy push button programming; no jumpers to cut or switches to set.

Features:

• Uses either fixed code or code hopping transmitters with up to 500ft (150m) range* using standard antenna, up to 1000' with additional hardware.
• External extended range antenna optional (sold separately)
• Mode switch for easy transmitter learning
• Compatible with all ENFORCER SK-series transmitters of the receiver’s base frequency and the optional Extended Range Antenna’s frequency
• Learns up to 15 remotes per channel
• 2 Form-C Dry Relay Contact (NO/NC/COM) Outputs. Rated at 10 Amps at 24 VDC each
• 2 Separate Channels with 5 Output Modes:
  • 1. Timed Pulse (0.5~99sec or 1~99min)
  • 2. Timed Momentary (1, 2, 3, 4, 5, 10, 30, 60 sec.)
  • 3. Toggle (On/Off)
  • 4. Latch (stays on until manually reset)
  • 5. Continuous or Validity (Output for as long as a signal is received)
• All outputs are independently controlled

*Transmitter range depends on the operating environment and installation.

Note: If the timed momentary option is chosen for a channel, then only a single time can be selected and will be available on all channels that are using the timed momentary option.

Specifications:

• Operating frequency: 315MHz*
• Memory capacity: 15 per channel
• Operating voltage: 10~24 VAC/VDC
• Operating current:
  • Standby: 16mA@12VDC, 12mA@24VDC
  • Active: 60mA@12VDC, 50mA@24VDC (both per channel)
• Relay output modes
  • Type: Independent, sequence, access control
  • Modes: .05~99 sec momentary (default, 1s) 1~99 min momentary, toggle, latch, follow (validity)
• Relay contacts: 2
• Rating: Form C 10A@14VDC
• Connectors: Screw terminals, +, -, with NO/NC/COM per relay
• Digital display: 2-digit, 7-segment LED
• Operating humidity: 5~95%, non-condensing
• Operating temperature: 32°~167° F (0°~75° C)
• Dimensions: 4-3/16″x7/8″x2-3/8″ (107x23x60 mm)