SWITCHSPOT - WiFi Dry Contact Sensor
Spot Protect

SWITCHSPOT - WiFi Dry Contact Sensor

Current Stock:
Add Spot Cable to order
  • Description

    WiFi Dry Contact Sensor for Remote Monitoring

    The SpotProtect SWITCHSPOT is a WiFi Dry Contact Sensor for monitoring existing alarms or sensors with NO or NC relay outputs in any location with exiting WiFi Service and Internet service. The SWITCHSPOT communicates its status back to the SpotProtect Cloud where users can login and view the history of the sensors as well make changes to the sensors programming. The appropriates person(s) can be notified by text and/or email when the sensor goes into an alarm state.

    Perfect for applications where a phone line is either unavailable or impractical!

    IMPORTANT: As with any monitoring device you must ensure it is installed correctly and tested regularly to ensure it is in working order and reporting as expected. The WIFI device must be located in a dry room temperature location. Do not install it outdoors or in a humid environment.

    For set up instructions visit https://www.spotprotect.com

    • WiFi 802.11 b/g (2.412 - 2.484 GHz)
    • Open, WEP, WPA, WPA2 Security Standards
    • Can be used for NO or NC applications

    ** Battery life is affected by reporting frequency (heartbeat),
    sensor type, Wi-Fi security type, distance from Wi-Fi
    router and other variables.

    Note: One (1) SPOTCABLE is required to setup the SpotSensors.

    • 1 - SWITCHSPOT WiFi Dry Contact Sensor
    • 2 - AA Batteries
    (1) SPOTCABLE required for initial programming

    Radio Specifications
    Operating Frequency 802.11 b/g (2.412 - 2.484 GHz)
    Electronics Core Specifications
    Power Supply: 2 x AA Batteries (Included)
    Max Operating Temperature Using Alkaline Batteries: -18°C to +55°C (0°F to +130°F) Using Lithium Batteries: -40°C to +85°C (-40°F to +185°F)
    Device Range Up to 250 ft.* (Typical to standard Wi-Fi devices)
    Battery Life Up to 5 years depending on sensor type, Wi-Fi security, distance from Wi-Fi router, reporting frequency and other variables. (Testing surpassed 90,000 transmissions until battery depletion.)
    Wi-Fi Security Standards Open, WEP, WPA, WPA2 Security Standards
    Wi-Fi Security Programming Via PC software using USB SpotCable and SpotProtect online software.
    Network Settings Auto DHCP/DNS or Static
    Data Logging On Wi-Fi disruption, unit will log the most recent 50 readings and transmit when Wi-Fi connection is re-established.
    Power Consumption 4uA sleep, 35mA active RX, 180mA TX (at +12dBm)
    Wi-Fi Data Rate Auto configures to best rate for maximum range.
    LED Lights Status / Activity
    External Wire Length 3 Feet (36 Inches)
    Data Logging (With Premiere Subscription to SpotProtect Cloud) On Wi-Fi disruption, unit can log up to 50,000 readings and transmit when Wi-Fi connection is re-established.

  • Reviews


    Be the first to